Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
and may require additional steps.
Test fit the product on the vehicle prior to any third part modifications and or finishing. The
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
© 2016 Go Rhino Products. All rights reserved
PART NO.
915105T
915105PS
PRODUCT DESCRIPTION:
Sport Bar 2.0, Mid size Textured
Black (International Vehicles)
Sport Bar 2.0, Mid size Polished
Stainless Steel Tubes
(international Vehicles
P: 888 427 4466
1

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Go Rhino 915105T

  • Página 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 2: Installation Instructions

    • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified vehicles. • Sensor sensitivity, factory sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors.
  • Página 3: Tools Needed For Installation

    INSTALLATION INSTRUCTIONS PARTS INCLUDED IN THIS LIST: Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. You may also click here to view an installation video or visit http://www.gorhino.com/Installation-Videos. TOOLS NEEDED FOR INSTALLATION: 5/32”...
  • Página 4 INSTALLATION INSTRUCTIONS STEP # 1 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 5 (2)3/8 ” x 1 1/4” hex bolts, per side. Do not install items K and L, cover plates, if a bed cover is going to be used. Do not fully tighten bolts, leave loose for final adjustment REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 6 • Attach side covers using (5) 1/4” flat washer, (5) 1/4 ” lock washer and (5) 1/4” x 3/4” button head bolts, per side. • Tighten screws to 70 in/lbs Max. DO NOT OVERTIGHTEN SCREWS REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 7 You can use the reference table from the right as a guide. • Remove sport bar and drill 17/32” holes through bed rails. Hilux S10, NP 300 Ranger REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 8 (3)3/8” x 1 1/4” flat head bolts, per side • Tighten all front and rear tube bolts to 26 ft/lbs Max. DO NOT OVERTIGHTEN BOLTS • Check and retighten all nuts and bolts periodically. REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 9: Product Registration

    This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.
  • Página 10: Descripcion Del Producto

    El fabricante / distribuidores de este producto no garantiza que esta versión en particular estará disponible en una fecha posterior. www.gorhino.com 589 W. Apollo St. Brea, CA. 92821 TEL: 888 427 4466 REV.01 © 2016 Go Rhino Products. All rights reserved...
  • Página 11: Peligro De Lesiones

    Los sensores de fábrica pueden leer grilletes o ganchos que sobresalgan de la guía y / o ganchos de remolque. • Todas las pruebas de sensores son completadas por Go Rhino Products y / o laboratorios de pruebas de terceros en •...
  • Página 12: Partes Incluidas En Esta Lista

    TUBO TRASERO (PASAJERO) TUBO TRASERO (CONDUCTOR) Go Rhino te recomienda y al instalador, leer este manual de instrucciones de instalación completamente antes de la Instalación del producto. También puede hacer clic aquí para ver un vídeo de instalación o visita: http://www.gorhino.com/Installation-Videos.
  • Página 13: Instructivo De Instalacion

    (2) rondanas planas de 3/8”, (2) rondanas de seguridad de 3/8” y (2) tornillos hexagonales de 3/8” X 1 ¼”, por lado. No apriete los tornillos • completamente, dejelos sueltos para ajustes finales. REV.01 2016 Go Rhino Products. All rights reserved. ©...
  • Página 14 3/8” x 1 ¼ “ por lado. No instale los components K y L si se va • a utilizar una cubierta de caja. No apriete los tornillos completamente, • déjelos sueltos para ajustes finales. REV.01 2016 Go Rhino Products. All rights reserved. ©...
  • Página 15 ¼”, (5) rondanas de seguridad de ¼” y (5) tornillos cabeza boton de ¼” x ¾” por lado. Apriete los tornillos a 70 in/lb Max. • NO APRIETE ENEXCESO LOS TORNILLOS REV.01 2016 Go Rhino Products. All rights reserved. ©...
  • Página 16 . Remueva el Sport Bar y barrene a travez de la caja a 17/32”. Hilux S10, NP 300 Ranger REV.01 2016 Go Rhino Products. All rights reserved. ©...
  • Página 17 3/8” x 1 ¼”, por lado. Apriete todos los tornillos de los tubos traseros y frontales a 26 ft/lbs Max. NO APRIETE CON • EXCESO LOS TORNILLOS. Periódicamente asegúrese de apretar tuercas y tornillos. • REV.01 2016 Go Rhino Products. All rights reserved. ©...
  • Página 18: Garantia Limitada

    Con respecto a cualquiera de dichos productos durante el período de garantía limitada, Go Rhino, a su sola discreción, deberá: (1) Proveer con la reparación o reemplazo de dichos productos (o la parte defectuosa), o (2) el crédito o el reembolso del costo de dichos productos a la condición de que si Go Rhino lo solicita al comprador, a expensas de Go Rhino, devolverá...

Este manual también es adecuado para:

915105ps

Tabla de contenido