Service Information; Troubleshooting - BLACK&DECKER ASI500 Manual De Instrucciones

90564808 AS1500.qxd:??????-00 BDL500 laser
Problem
• Unit will not start.
• Will not inflate.
• LCD not illuminated.
For assistance with your product, visit our website www.blackanddecker.com for the location of the
service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING:
The use of any accessory not recommended for use with this tool could
be hazardous.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com
FULL ONE-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for one year against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailerʼs policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check with the retailer for their
specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may
be required. Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory and on our website
www.blackanddecker.com.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state or province to province.
Should you have any questions, contact the manager of your nearest Black & Decker
Service Center. This product is not intended for commercial use.
Free warning label replacement: If your warning labels become illegible or are missing,
call 1-800-544-6986 for a free replacement.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
5/18/10

TROUBLESHOOTING

Possible Cause
12 Volt adapter
not connected.
Accessory socket
not live
Main ON/OFF switch not in
correct position.
The fuse in the 12 Volt adapter
is blown.
Cord or switch is damaged.
Incorrect mode selected.
Unit in sleep mode.
10
9:56 AM Page 10
Possible Solution
Connect the 12 Volt
adapter.
Turn key to accessory
position
Turn main switch to
required position.
Replace the fuse with
one of the same size
and type (8A/250V).
Have cord or switch
replaced at Black &
Decker Service Center or
Authorized Servicer.
Select correct mode.
Press any button on LCD.
See ʻTools-Electricʼ
– Yellow Pages –
for Service & Sales