Klein Tools CL3000 Manual De Instrucciones página 2

ENGLISH
FEATURE DETAILS
B
69204
C
D
AUTO
DC
A. Use CAT III rated leads or higher.
Do not attempt to measure more than 750V AC or 1000V DC
or any current on lead input.
B. Keep hands below line when measuring high current levels.
C. Functionality Button
• Switch between AC and DC.
Ω
• Switch between , , and
D. Auto / Manual Range
• Press repeatedly to cycle through manual ranges.
• Hold for 2 seconds to return to auto ranging mode.
• is displayed on LCD only during auto ranging mode.
AUTO
E. Relative Reading Mode
• Press to store current value.
• Display will now show the difference between the
stored and live readings.
• Press again to return to live reading.
F. Data Hold / Backlight
• Press to hold current value on display.
• Press again to return to live reading.
• Press button for 2 seconds to activate or deactivate backlight.
• Using light drains the battery significantly.
• Backlight turns off automatically after 15 seconds.
1
On Back
V
A
.
G.H. Battery Replacement (1 x 9V)
• When
• Remove the back screw and replace the single 9V battery
• Turn off device before removing back cover.
Auto Power-Off
• Device will power off after 30 minutes non-use.
• Turn the dial or press a button to wake.
F
G
4
E
H
AC Current: < 200A
1.
Features:
• Center wire in guides for best accuracy.
• Opposing currents cancel (use line-splitter when necessary).
DC Voltage: < 1000V DC
2.
Features:
AC Voltage: < 750V AC
3.
Features:
indicator is displayed on the LCD,
battery must be replaced.
observing polarity.
FUNCTION INSTRUCTIONS
69204
2
3
1
5
6
4
REL HOLD RANGE
AUTO
DC
REL HOLD RANGE
AUTO
DC
V
REL HOLD RANGE
AUTO
DC
V
V