Tabla De Contenido; Marauder 7.1 Virtual Surround Gaming Headset; User Guide; Surround Gaming Headset Into Your Usb Audio - VENOM Marauder 7.1 Surround Gaming Guia Del Usuario

English

Marauder 7.1 Virtual Surround Gaming Headset

For use with PS3™, PS4™, Xbox 360®,
Xbox One® & PC.
Model number: VS3056

User Guide

Thank you for purchasing the Marauder 7.1 Virtual
Surround Gaming Headset. Please read this user guide
thoroughly before using the headset and keep the
guide safe for further reference. This guide includes
the most common set ups for using the Marauder 7.1
Surround Gaming Headset with your PS3, PS4, Xbox
360 or Xbox One system via optical connection.
For any additional set ups for your TV, monitor or
gaming monitor please consult your manufacturer's
instructions. Please note that for older models of the
Xbox One controller that do not feature the built in
jack port, an Official Surround Headset Adaptor is
required (sold separately).
Important: If you have any compatibility problems,
please visit our website first to ensure you have the
most up to date drivers. If the problem persists, please
contact our customer service team.
If you require any further help please contact our
helpline. We hope you enjoy your Marauder 7.1 Virtual
Surround Gaming Headset.
Contents:
1 x Marauder 7.1 Virtual Surround Gaming Headset
1 x USB Audio HUB
1 x Optical Cable
1 x Audio Cable 3.5mm to 3.5mm
1 x Audio Cable 2.5mm to 3.5mm (for Xbox 360)
1 x User Guide
Setting up your PS3™ via Optical connection:
1. Connect the two wires from your Marauder 7.1
Surround Gaming Headset into your USB Audio
Hub. The Audio plug slots into the port with the
headset image, and the Micro USB plugs into the
port with the USB image.
2. Connect the Optical Cable into your USB Audio
Hub via the Optical Port, and the other end into the
Optical Port on the back of your PS3 system.
3. Connect the USB Cable from your USB Audio Hub
into a spare USB port on your PS3 system.
4. Power up your PS3 system and the light on the USB
Audio Hub will turn red.
You will also need to change the PS3 system
settings to Optical:
1. On the PS3 menu go to "Settings", select >
"Accessory Settings" > "Audio Device Settings"
> "Input Device" and scroll until "Marauder 7.1
Surround Gaming Headset" is displayed. Repeat
this step for "Output Device Settings" and press
"OK" to confirm.
2. Go back to "Settings" and select > "Sound
Settings" > "Audio Output Settings" > "Optical
Digital". Ensure only "AAC" is ticked and not
"Dolby Digital" or "DTS".
Setting up your PS4™ via Optical connection:
1. Connect the two wires from your Marauder 7.1

Surround Gaming Headset into your USB Audio

Hub. The Audio plug slots into the port with the

headset image, and the Micro USB plugs into the

port with the USB image.

2. Connect the Optical Cable into your USB Audio

Hub via the Optical Port, and the other end into the
Optical Port on the back of your PS4 system.

3. Connect the USB cable from your USB Audio Hub

into a spare USB port on your PS4 system.
4. Power up your PS4 system and the light on the USB

Audio Hub will turn red.

You will also need to change the PS4 system

settings to Optical:

1. On the PS4™ menu go to "Settings" and select >
"Sound and Screen" > "Audio Output Settings"
> "Primary Output Port" > "Digital Out (Optical)".
Ensure only "AAC" is ticked and not "Dolby Digital"
or "DTS" and press "OK" to confirm.
2. On the "Audio Output Settings" menu select
"Audio Format (Priority)" and ensure "Linear PCM"
is ticked.
3. Go back to "Settings" and select > "Devices"
>"Audio Devices" > "Output to Headphones" and
select "Chat Audio".
Setting up your PS4™ via Optical connection (PS4
Slim console only):
1. Follow step 1 of standard PS4 setup. Then for step
2, instead of connecting the Optical Cable to your
PS4 system, insert into the Optical input of your TV.
This is usually located on the back of your TV.
2. Then follow steps 3 and 4 as normal.