Package Contents - Grandstream Networks GWN7600 Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
EN
OVERVIEW
The GWN7600 is a mid-tier 802.11ac Wave-2 WiFi access point for small to medium
sized businesses, multiple floor offices, commercial locations and branch offices. It of-
fers dual-band 2x2:2 MU-MIMO with beam-forming technology and a sophisticated an-
tenna design for maximum network throughput and expanded Wi-Fi coverage range.
To ensure easy installation and management, the GWN7600 uses a controller-less distrib-
uted network management design in which the controller is embedded within the product's
web user interface. This allows each access point to manage a network of up to 30 GWN76x0
series APs independently without needing separate controller hardware/software and with-
out a single point-of-failure. This wireless access point can be paired with any third party
routers as well as Grandstream GWN series routers. With support for advanced QoS,
low-latency real-time applications, 450+ concurrent client devices per AP and
dual Gigabit network ports with PoE, the GWN7600 is an ideal WiFi access point
for medium wireless network deployments with medium-to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 40 °C.
• Do not expose the GWN7600 to environments outside of the following humidity range:
10-90% RH (non-condensing).
• Do not power cycle your GWN7600 during system boot up or firmware upgrade. You
may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

GWN7600 Access Point
1 x Quick Installation Guide
Ceiling Mounting Bracket
1 x GPL Statement
3 x M3 NUT
3 x Screw (PM 3.0 x 50)
1
Mounting Bracket
3 x Plastic Expansion Bolt
3 x Screw (PA 3.5 x 20 )
GWN7600 PORTS
Port
Description
POWER
Power adapter connector (DC24V, 1A)
Note: Power adapter is not provided.
NET/POE
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE.
NET
Ethernet RJ45 port (10/100/1000Mbps) to your
router or another GWN76xx.
USB 2.0 port (for future IOT & location based
applications)
RESET
Factory reset button. Press for 7 seconds to reset
factory default settings.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido