Safety Rules - Promax PROPOWER-1 Manual De Instrucciones

USER'S MANUAL PROPOWER-1.

3. SAFETY RULES

*
Use this equipment connected only to devices or systems with their negative of
measurement connected to ground potential.
*
The external DC supply adapter is a class I equipment, for safety reasons plug it to
a supply line with the corresponding ground terminal.
*
When using some of the following accessories use only the specified ones to
ensure safety:
Mains adapter
Power cord
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions.
*
The negative of measurement is at ground potential.
*
Use for the signal inputs / outputs, specially when working with high levels,
appropriate low radiation cables.
*
Follow the cleaning instructions described in the Maintenance paragraph.
02/2005 Page 5