Safety Guidelines - Definitions; Safety Rules - Delta 36-136 Instructivo De Operación

SAFETy GUIdELINES - dEFINITIONS

This manual contains in for ma tion that is im por tant for you to know and un der stand. This in for ma tion re lates to pro tect ing YOUR
SAFE TY and PRE VENT ING EQUIP MENT PROB LEMS. To help you rec og nize this in for ma tion, we use the symbols below. Please
read the man u al and pay at ten tion to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially haz ard ous situation which, if not avoided, may result in minor or mod er ate injury.
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in
property damage.
This product was designed for certain applications only. Delta Machinery strongly recommends that this product
not be modified and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, dO NOT use this unit until you have first contacted Delta to determine if it can or
should be performed on the product.
THIS PROdUCT WAS dESIGNEd TO BE USEd AS A
1.
STANd FOR MITER SAWS ANd PLANERS. The stand
will support 300 lbs. Any misuse or abuse can result in
product damage or personal injury.
dO NOT STANd ON THE WORK TABLE or use the
2.
support extensions as a ladder or scaffolding.
3. PROPERLy SECURE THE MITER SAW OR PLANER
to the stand before operation.
4. PLACE THE STANd ON A FLAT ANd LEVEL SURFACE
to prevent rocking or tipping.
5. TAKE CARE dURING THE RAISING ANd LOWERING
OF THE PROdUCT to reduce the hazard of pinching
hands and fingers.
FOREWORd
The Model 36-136 is a stand designed to accommodate most miter saws and planers and to provide portability for those units,
both in the field and in the shop.
Carefully unpack the product and all loose items from the shipping container(s). Lay the parts down on the floor so that all parts will
be easily accessible during assembly.

SAFETy RULES

REAd ANd UN dER STANd ALL WARNINGS ANd OP ER AT ING IN STRUC TIONS BE FORE USING
THIS EQUIP MENT. Failure to follow all instructions listed below, may result in electric shock,
fire, and/or serious personal injury or property damage.
SAVE THESE INSTRUCTIONS
Failure to follow these rules may result in serious personal injury.
FUNCTIONAL dESCRIPTION
UNPACKING ANd CLEANING
Technical Service Manager
delta Machinery
4825 Highway 45 North
Jackson, TN 38305
(IN CANAdA: 125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)
To reduce the risk of injury, keep both
hands on handle when raising and lower-
ing the stand. The stand has gas assist lifting and may
raise unexpectedly when lever is released.
6. CHECK THE LEGS ANd OTHER SUPPORTS to see
that they are properly locked in place before operation.
7. WEAR EyE ANd HEARING PROTECTION. ALWAyS
USE SAFETy GLASSES. Everyday eyeglasses are NOT
safety glasses. USE CERTIFIED SAFETY EQUIPMENT.
Eye protection equipment should comply with ANSI
Z87.1 standards. Hearing equipment should comply
with ANSI S3.19 standards.
dO NOT MOdIFy or use the stand for any operation for
8.
which it is not intended.
2