Jung eNet FMES36804REG Instrucciones De Servicio página 6

Sensor de energía eNet 4 fases, carril DIN
Function
Advanced device settings
Parameters
Manual commissioning
Transmission mode
Channel settings
Parameters
Active energy
Extended channel settings
Parameters
Manual commissioning
Transmit voltage
Transmit current
Transmit effective power
82582013
J0082582013
Energy, Unused
Basic setting: Energy
Setting options, Basic set­
ting
On, Off
Basic setting: On
Single, Double
Basic setting: Double
Setting options, Basic set­
ting
-1073741823...1073741823
Wh
Basic setting: 0 Wh (Current
value)
Setting options, Basic set­
ting
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
6/8
Energy
The channel works as an
energy sensor.
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
Explanations
Disables manual commissio-
ning for all device channels. In
the "Off" setting, the device
cannot be reset to the factory
setting.
The transmission of all measu-
red value telegrams is repea-
ted to guarantee increased
transmission security (no un-
secured transmission). It is
possible to switch over to sim-
ple transmission.
Explanations
Displays the currently cumula-
ted active energy. The value
can be reset to 0 or set to any
other value.
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
Transmits the current voltage
value.
Transmits the current current
value.
Transmits the average effecti-
ve power. If negative values
are displayed, then effective
power is fed in, e.g. via a pho-
tovoltaic system.
10.04.2017