After Treatment; Accessories And Spare Parts - HoMedics MDA100-EU Manual De Instrucciones

• Place the diamond tip flat against the skin until you feel suction then move it
slowly across the surface of the skin in a smooth motion, covering the same
area no more than 2-3 times in one treatment. Do not press hard. In some areas
it can help to hold the skin taught with the other hand (eg. around the eyes).
• The diagrams above will help you establish an effective facial routine.

After treatment

• Press and hold the power button for 2-3 seconds to turn off device.
• Wash your face with cold water to remove any remaining dead skin cells and
then apply your preferred moisturiser. NOTE: Avoid using AHA (acid based)
moisturisers on the day of treatment
• Depending on your skin type, you may experience some reddening or
increased sensitivity after treatment. This is perfectly normal and usually
subsides within a few hours.
• Avoid direct sun exposure after treatment, consider applying a stronger
sunscreen as required.
• Always, dispose of the used black wool filter and replace with a new filter
ready for next use.
• Remove dead skin cells and debris from the diamond tip using the brush
provided. We also recommend the periodic use of an ultrasonic cleaner for
deep cleaning the diamond tip, especially if it starts to feel smooth or less
effective.
Other Treatments
Other areas of the body can also be treated 2-3 times a week. For example, neck,
chest, hands etc. When treating larger areas, replace the black wool filter part
way through the treatment in order to maintain the level of suction. Aim
to cover the same area no more than 2-3 times in one treatment.
FAQ
How often should I use the product?
It's best to start slowly – usually just once a week, then build up to 2 or 3 times a
week if this is comfortable for your skin.
Will it hurt?
No. Treatment should not be painful. Depending on the sensitivity of your skin,
you may feel slight discomfort from the diamond tip as it moves across the skin
and there could be some short term redness or sensitivity after treatment, but
this will soon subside. If treatment is uncomfortable, then you may need to use a
lower power setting or switch to the sensitive diamond tip.
Can I use the product in combination with anti-aging creams/
serums?
If your anti-aging cream or serum contains AHA (or acid) then it should not be
used on the same day as the microdermabrasion treatment, but can be used on
non-treatment days. Non-AHA (acid free) anti-aging products can be used at
any time.
The product does not switch on
The power button has to be pressed continuously for 2-3 seconds to turn the
product on. If you try this and it still doesn't work, then it may need recharging.
See 'CHARGING THE BATTERY'
The product seems to be losing power
This can happen if the black wool filter is not replaced after each treatment. Try
fitting a new filter. Also check the tip to ensure that the plastic part of the tip
has no cracks or damage. Check that the two rubber o-rings are in place on the
nozzle end of the unit (where the tip fits over).
The diamond tip no longer seems rough
The diamond tip can accumulate skin cells over time which may start to make it
feel smooth and reduce its effectiveness. If this happens we recommend cleaning
the diamond tip in an Ultrasonic Cleaner. These are either available to purchase,
or jewellery stores offer a cleaning service. If using the product regularly you may
need to do this several times a year to maintain optimum effectiveness.
What if I still have a problem or question that is not answered
here?
Please contact our service team who will be very happy to help you.
Customer Service
Tel: +44 (0) 1732 378 557
Email: support@homedics.co.uk
www.homedics.co.uk

ACCESSORIES AND SPARE PARTS

Avialable from our website: www.homedics.co.uk/parts-and-accessories.html
• Replacement Black wool filters (50pcs)
• Diamound tip
• Sensitive diamound tip
• Precision tip - for precise treatment of small areas
• Body tip - for use over larger areas.
5