Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL / ELECTRONIC KEY FUNCTIONING DESCRIPTION
A BUTTON:
Arming and disarming
With
ignition
WITHIN 5", emote control
r
learning.
AFTER 5", anti-robbery function
(if programmed)
After making all electrical connections, is possible customize the system taking into account
the characteristics of the motorcycle and customer requirements.
ACOUSTIC SIGNALLING
This function allows to activate/deactivate ALL the acoustics signalling during arming/disarming
and alarm check.
PERIMETER INPUT BUTTON
This function allows to select the perimeter input as anti-robbery enabling.
LOCK ENGINE PASSIVE ARMING
This function allows the automatic self-arming of the stop engine, without use the remote control,
after 30 seconds after turning off the ignition key.
ACCIDENTAL ANTI-DISARMING
This function allows the automatic self-arming when the alarm is accidentally disarmed by
remote control. the function is cancelled if, within 30 seconds from the disarming, the protected
compartments (ignition key/stand/saddle) are opened.
PREALARM
This function allows to signal an alarm condition with a short siren cycle of 5". Only now, within 30"
seconds, if another alarm is signalled, the siren will be active for 30".
ANTI-ROBBERY
This function allows to stop the motorcycle with ignition key On. Pushing the "A" button of remote
control with the ignition key On or giving a negative signal on the BLUE wire, direction indicators
ash once. After 30" the siren and direction indicators will be active for 30".
After 15" the motorcycle will be locked. The disarming of the anti-robbery function is possible only
with the electronic key or with the PIN CODE procedure.
Note:
- in order to activate the function by remote control, the ignition key of the motorcycle must be
turned ON for at least 5 "
- if programmed, the BLUE wire can be used only to enable the anti-robbery function.
MANAGEMENT OUTPUT FOR MODULE / ALARM
This function allows to select the functioning of the WHITE/BROWN wire as:
A) Negative signal during siren cycle of 30".
B) Negative signal with system armed.
MANAGEMENT OF ANTI-LIFT SENSOR
This function allows to completely exclude the tilt anti-lifting sensor.
C BUTTON:
Panic and siren exclusion
With
ignition
during programming,
enables or disables functions
C
A
key ON,
PROGRAMMABLE FUNCTIONS
key ON,
B
Alarm arming and disarming
13
B BUTTON:
Anti-lift exclusion or
alarm memory
With
ignition
key ON,
WITHIN 5", input into
programmable functions
Electronic key
inserting the electronic key in
the electronic socket
Publicidad
Tabla de contenido
