Getting Started; Setting Time; Setting Alarm - IKEA FNURRA Manual Del Usuario

ENGLISH

Getting started

Remove light lens (1) and open lid (2) and insert AA
Ni-MH batteries with correct polarity and/or connect USB
cord into connector (3).

Setting time

After USB cable or battery is inserted, hours will start
blinking.
Increase and decrease hours and minutes
Set value.
Short press toggles between AM/PM and 24 hrs.
Long press starts clock setting sequence.

Setting alarm

Long press activates alarm setting mode.
Increase and decrease hours and minutes.
Set value.
Short press toggles alarm on/off.
Alarm symbol in display is on when alarm is
activated.
Select alarm sounds or mute sound. Sounds preview
with 50% volume.
Display symbols
Alarm activated.
Snooze activated.
Sound muted.
Flash: Low battery, Steady On: Charging, Off: Fully
Charged
6