Technical Characteristics - EYEON 080305 E TEMPB Manual Tecnico

Once connected to the Eyeon system, the temperature sensor is
EN
controlled by the supervisor.
The device regularly transmits a data package (containing the recorded
temperature value) via the bus.
The temperature sensor, depending on the set threshold, is updated and
transmits a remote output activation or deactivation command via the bus.
Power supply
Current absorbed (max.)
Size (HxWxD)
Sensor range
Operating temperature
Weight
Fixing for box 503
Warning
• Install the equipment by carefully following the instructions given
by the manufacturer and in compliance with the standards in force.
• All the equipment must only be used for the purpose it was designed
for. Videotrend srl declines any responsibility for improper use of
the apparatus, for any alterations made by others for any reason or
for the use of non-original accessories or materials.
• All the products comply with the requirements of Directive
2006/95/EC (which replaced Directive 73/23/EEC and subsequent
amendments), as certified by the CE mark they carry.
• Installation, mounting and assistance procedures for electrical
devices must only be performed by specialised electricians.
• Cut off the power supply before carrying out any maintenance
work.

TECHNICAL CHARACTERISTICS

24Vdc +/- 5%
5 mA
48 mm x 19,3 mm x 58 mm
+5°C / +30°C
0°C / +55°C
25 gr
YES