Epson IM-800 Manual Del Usuario página 11

All manuals and user guides at all-guides.com
English
Be sure to push the plug of the power cord all the way into the AC inlet
of this product. The plug should make contact with the back of the inlet.
When disconnecting the power cable, hold the plug firmly. Do not tug
on the cord itself.
Be sure to set this product on a firm, stable, horizontal surface. The
product may break or cause injury if it falls.
Do not use the unit in locations subject to high humidity or dust levels.
Excessive humidity and dust may cause equipment damage, fire, or
shock.
Do not use the product where inflammable fumes of gasoline, benzine,
thinner or other inflammable liquids may be in the air. Doing so may
cause an explosion or fire.
Do not place heavy objects on top of this product. Equipment may fall
or collapse, causing breakage and possible injury.
To ensure safety, unplug this product before leaving it unused for an
extended period.
Do not drop, bump, or otherwise subject this product to strong vibration
or impact.
Do not block the openings on this product. Be sure not to install the
product in a narrow place that is not well ventilated, not to place it on
any bedding or carpet and not to put any cloth such as a tablecloth or
blanket on it. The openings are provided for the ventilation necessary to
ensure reliable operation and protection from overheating or fire.
Be sure to attach all covers after setup. If they are not attached, foreign
matter may enter this product and it may not operate correctly.
Never clean the product with thinner, benzine, alcohol, or other such
solvent.
Do not use this product with any voltage other than the specified one.
Doing so may lead to fire.
Do not insert fingers or foreign matter into the CD-ROM disk tray or
openings. Doing so may lead to fire, shock, or injury.
Never hold this product by the rear cover, the front panel, or the
CD-ROM disk tray. They cannot support the weight of the product, so it
may fall onto the floor.
Make sure that the total power requirements of all devices receiving
power from this product do not exceed the power limitation. See the
specifications for more detailed information.
Be careful not to cut your finger on any edge of the unit.
Be sure to use EPSON supplied DIMMs, HDDs, and CPUs.
To get the latest information about which PCI board can be used with
this product, contact your EPSON dealer.
If you turn off the unit, wait at least 10 seconds before you turn it on
again.
IM-800 User's Manual 5