Connecting A Crash Cymbal (Cy-8: Sold Separately); Connecting A V Hi-Hat (Vh-11: Sold Separately); Other Options - Roland V-Drums TD-9 Inicio Rápido

Connecting a crash cymbal
(CY-8: sold separately)
Use a stereo cable to connect the CY-8 to the TD-9 as shown in
the illustration.
1.
Attach the Cymbal Mount (MDY-10U
: sold separately) to the stand.
2.
Connect the cable included with the
pad to the TD-9's CRASH2 jack.

Connecting a V hi-hat (VH-11: sold separately)

CONTROL OUT
HHC
jack

Other options

In addition to items proposed here, you can expand your system with other options. For details,
talk with your local Roland dealer or check out the Roland website.
http://www.roland.com/V-Drums/
Dedicated V-Drums setup mat
TDM-20/10
MDY-10U (sold separately)
from CY-8
Use the existing cables to connect the VH-11 to
the TD-9 as shown in the illustration.
1.
TRIGGER OUT
2.
jack
HH
* For details on mounting the VH-11 on a hi-hat stand, refer
to the "VH-11 owner's manual. "
* The hi-hat stand is sold separately.
* The original cymbal pad (CY-5) used for the hi-hat can be
used as a splash or crash cymbal. Mount it using an Cym-
bal Mount (MDY-10U : sold separately) or Cymbal Parts
Set (CYM-10 : sold separately).
The V hi-hat is a prime example
of Roland's V-Drums technology
The main feature of the V hi-hat (VH-
11) is the design that creates the
movement, weight and playing feel of
a acoustic hi-hat.
The VH-11 can be mounted on a just
about any hi-hat stand, allowing
Cymbal Mount
normal bow/edge playing technique,
smooth transition between the open
and closed position and even foot
splashes.
Connect the HH (hi-hat trigger) cable
to the TRIGGER OUT jack.
Connect the HHC (hi-hat control) cable
to the CONTROL OUT jack.
Stereo monitor headphones
RH series
15