Polaroid POLMP02 Guia Del Usuario página 3

BE SAFE WITH POLAROID MINT
• Never leave your printer or the ZINK
paper in an area that might become
extremely hot or where it will be
exposed to direct sunlight for a long
time. This can cause your printer to
overheat or suffer other problems.
• Don't get it wet! If you need to clean
your printer, use a soft cloth that's
been slightly dampened with water or
rubbing alcohol, and gently wipe away
4 | EN
any dirty spots. Don't submerge the
®
whole thing in water, ever.
• Be careful with your printer. Try not to
drop it, or shake it violently. The inside
of the printer has a lot of very small
parts that could break if they are jostled
around too much.
• Always use the charging cable that
comes in your box to charge your
printer, and be careful that it doesn't
get too hot while charging. If you
feel the printer overheating while it
charges, immediately disconnect it
from the power source and let it cool
down before turning it back on.
• The Polaroid Mint Pocket Printer
absolutely will not work without
downloading the Android or iOS
™
application. If you do not have an
Android phone or an iPhone ,
™ ®
unfortunately, this printer will not work
for you.
EN | 5