Automatic Configuration - Nokia N900 Manual De Usuario

30 Connect your device
In the connection setup dialogs, enter the encryption keys
depending on the WLAN connection in question. For stronger
security, it is recommended that you use the WPA method, if
possible.
WEP key
Enter the wireless equivalent privacy (WEP) key. You can
define more than one WEP key, and you can also select the
default key, if that is required by your WLAN.
WPA key
Enter the Wi-Fi protected access (WPA) preshared key. The key
length must be between 8 and 63 characters. Only ASCII
characters are allowed.
WPA with EAP type
Select the extensible authentication protocol (EAP) type from
the following:
TLS (transport layer security) authentication — Select the
client certificate used for authentication.
PEAP (protected extensible authentication protocol)
authentication or TTLS (tunnelled transport layer
security) — Select an authentication method used inside
PEAP or TTLS and an optional client certificate.
For MSCHAPv2, define a user name and a password. Select the
Prompt password at every login
your password to be always requested when a connection is
created. For GTC, enter your user name. You are prompted for
a response upon connection creation. The client certificates
check box, if you want
are optional. For more information, contact your internet
service provider.
Define advanced settings
Select Settings and
>
Connections. Select the connection and Edit. In the last
dialog, select Advanced.
Modify WLAN proxy settings
Enable proxies
1 Select Use proxy.
2 Enter the IP address of the proxy server, or the host name.
The format of a domain name can be
proxy.company.com.
3 Enter the number of the proxy port.
Bypass proxies
If you have domains for which the use of proxies should be
bypassed, select Do not use proxy
names for which the proxy is not needed.
Enable automatic proxies
To obtain the IP addresses automatically from the internet
service provider, select the
box, and enter the web address of the server in the
address field.
IP address settings
Select the IP Addresses tab.
Internet connections
for, and enter the domain

Automatic configuration

>
check
Web