Local Messages Of The Remote Keypad; Remote Keypad Connection Cables; Installation Procedure - WEG SRW 01-HMI Guia De Instalacion

5. LOCAL MESSAGES OF THE REMOTE KEYPAD

E0031: No communication with the UC.
ErCrC: Communication with the UC presenting faults.
COPY: Remote Keypad recording data in the internal memory.
Read: Remote Keypad sending data to the UC.

6. REMOTE KEYPAD CONNECTION CABLES

The cables for the connection of the Remote Keypad to the Control
Unit can be acquired in the following models:
Table 2: Remote Keypad connection cables
REMOTE KEYPAD connection cables
0.5 m (1.6 ft) Remote Keypad connection cable
1.0 m (3.3 ft) Remote Keypad connection cable
1.5 m (4.9 ft) Remote Keypad connection cable
2.0 m (6.5 ft) Remote Keypad connection cable

7. INSTALLATION PROCEDURE

The installation procedures of the Remote Keypad in the vertical
position are described below. The installation procedures of the
Remote Keypad in the horizontal position are similar.
NOTE!
The Remote Keypad can be connected and
disconnected with the Control Unit (UC) powered up.
Description Part number
SRW01-CH1
SRW01-CH2
SRW01-CH3
SRW01-CH4
1 - Remote Keypad
2 - Connection cable
SRW01-CHx
5