SSS Siedle SG 650-0 Informacion De Producto página 5

English
Application
Smart Gateway Professional: top
hat rail device for private or profes-
sional use.
Interface between In-Home bus, IP
networks, the internet and mobile
phone network: Call, speech and
video signals from the door are
transmitted to the network and
received by an app or client soft-
ware. The smartphone, tablet or
PC assumes all the functions of an
indoor call station including video
display, door release and switching
functions.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
2 Description of display and operating elements
Element LED operating status
Link lights up in green
off
In-Home flashes green
lights up in green
off
Status flashes green
lights up in green
lights up in red
Flashes alternately green/red
Reset Press briefly
Prog. Hold down for 3 seconds
Mounting
1 Mount the Smart Gateway on the
top hat rail (distribution).
Mounting without a top hat rail is
not possible.
Installation and commissioning
Installation and commissioning are
described in the Siedle In-Home-Bus
Video system manual.
Terminal assignment
+, – Supply voltage
20–50 V DC
ERT, ETb Storey call button
TaM, TbM In-Home bus Monitor
branch
S1, S1 Potential-free contact
max. 30 V AC/DC, 2 A
E1, E1 galvanically isolated
4–30 V DC, 10 mA
PE, PE Equipotential bonding
LAN
Function
Connection to LAN established
No connection to the LAN
User activated in Plug+Play mode / manually
(see Table A)
Reserve bus addresses (see Table B)
Operating status
Not ready for operation
System start (see table A)
Operating status (see table B)
Programming mode Plug+Play
Not ready for operation
Update
The device is restarted
Programming mode Plug+Play (Configure device)
Programming manual (Activate device)
Connection of PE terminals
Connect each PE terminal with a
rigid earthing wire (1.5 mm²) to
the PE rail/terminal block using the
shortest route.
Connection of LAN socket
For network connection, only an
RJ-45-S/FTP patch cable may be
used.
Specifications
Operating voltage: 20–50 V DC,
PoE in accordance with 802.3af
Operating current: max. 400 mA
Protection system: IP 20
Ambient temperature:
0 °C to +40 °C
Horizontal pitch (HP): 6
Dimensions (mm) W x H x D:
107 x 109 x 60
5