Receiving Traffic Information - Alpine 3DE-7887R Manual De Operación

1
2
44
T. INFO
T.INFO TP
UP
DN
T.INFO TP
RDS Operation
Receiving Traffic
Information
Press the T.INFO button to activate the Traffic
Information mode.
Press the DN (g) or UP
select your desired traffic information station.
When a traffic information station is tuned in,
the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "TRF-INFO" for 2 seconds and returns to
the PS display.
When traffic information broadcast is over, the unit
will automatically set in the standby mode.
Notes: • If the traffic information broadcast
signal falls below a certain level, the
unit remains in the receiving mode for
1 minute. If the signal remains below a
certain level for over 1 minute, the
"T.INFO" indicator blinks.
• If you do not want to listen to the traffic
information being received, lightly
press the T. INFO button to skip that
traffic information message. The T.
INFO mode will remain in the ON
position to receive the next traffic
information message.
• If the volume level is changed while
receiving traffic information, the
changed volume level will be
memorized. When traffic information
is received next time, the volume
level will be automatically adjusted to
the level memorized.
English
(f) button to