Frequently Asked Questions (Faqs) - Marmitek BOOMBOOM 93 Modo De Empleo

aptX
The aptX audio codec is available for high quality stereo audio
over Bluetooth.
x
Compression ratio:
x
Max Data Rates:
x
Frequency range:
x
Algorithmic delay:
x
Dynamic range:
x
THD+N:
SBC (subband codec):
If aptX is not available, the BoomBoom 93 will connect using SBC.
With a view to further improving the product, Marmitek retains the
right to change specifications and/or designs without prior notice.
6

Frequently asked questions (FAQs)

I cannot pair my BoomBoom 93.
Please note the following:
1. Ensure that the mains adapter is connected and the blue
LED is flashing slowly.
2. Ensure that the Bluetooth feature on your mobile phone is
on. (Please check your smartphone's manual for reference).
3. Ensure that the distance between your smartphone and the
BoomBoom 93 does not exceed 10 metres and there are no
major obstacles between them.
4. Make sure the BoomBoom 93 is not already connected to
another device. (In which case the blue LED will be lit
continuously.)
There is no sound coming from my audio system
Ensure that the audio cable is connected properly (AUX IN), the
correct input is selected on your audio system, the correct output
is selected using the switch at the back of the BoomBoom 93, and
the volume of your audio system is set to the desired level.
14
4:1
352kbps.
10Hz to 22kHz.
<1.89ms @ Fs 48KHz.
16 bit: >92dB.
-68.8dB
© MARMITEK