Preparations; Attaching The Antennas; Attaching To A Sony Camcorder - Sony WRR-855S Manual De Instrucciones

Pin assignment
Note
Be sure to check the operating voltage and
polarity when connecting to a power
source.
n Camcorder attachment knob
Used to fix the unit to a Camcorder
For details on attaching to a Camcorder, see
"Attaching to a Sony Camcorder" on page 9.
o OUTPUT connector (XLR 3-pin,
male)
Supplies audio signals. You can connect
this to the microphone input connector of a
Camcorder, mixer, tape recorder or other
similar equipment.
Pin assignment
Note
When connecting to an audio mixer which
has a phantom powering capability for
microphones, it is recommended to use the
mixer with the phantom power off.

Preparations

Attaching the Antennas

Attach the supplied antennas to the antenna
a/b connectors.
1
Align the protruding part of the
connector with the antenna slot.
.
2
Turn the antenna to lock.
Attaching to a Sony
Camcorder
On the HDW/DVW/MSW/PDW-series
Camcorder, a slot for mounting the wireless
Preparations 9