Description Of The Equipment; Warnings And Safety Devices - Beretta CONNECT MIX STAND ALONE Instrucciones Para El Instalador Y El Servicio De Asistencia Técnica

Connect MIX STAND ALONE conforms to:
Low Voltage Directive 73/23/EEC
●
Electromagnetic Compatibility Directive 89/336/EEC
●
This instruction manual is an integral part of the manual for the
boiler to which the Connect MIX ST AND ALONE unit is
connected.
See the latter man ual for GENERAL WARNINGS and BASIC
SAFETY RULES and other specific information on the func-
tioning of the boiler.
The following symbols are used at some points in the manual:
WARNING – f or actions that call f or par ticular caution
and adequate training.
FORBIDDEN – for actions that MUST NOT be carried
out under any circumstances
WARNINGS FOR THE USER:
This device does not require any setting or checking by the user.
Opening the front cover on the device is therefore forbidden.
Check the water pressure in the system from time to time. If
necessary, alter the pressure as indicated in the instruction
manual.
If the pressure drops frequently , call in prof essionally trained
personnel to check the status of your system.
Warnings and safety considerations

Description of the equipment

Technical data
Dimensions and weight
Hidraulic circuit
Circulation unit
Wiring Diagrams
Installation of the appliance
Typical installation la yout
Hidraulic connections
Electrical connections
First starting up
Circulation pump
Three-way mixing valve
Programming parameters
Checks after installation
Cleaning
UK
Page
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
DESCRIPTION OF THE EQUIPMENT
The Connect MIX ST AND ALONE is a water separator that is to be
used with every boilers, where it separates the water in the gen-
erator and in the plant, when the latter is characterised by high
flow rates that exceed those developed by the generator itself. It
can also be used to manage mixed low and high temperature
heating systems (radiators / fan coils and radiant panels).
The Connect MIX ST AND ALONE unit can be b uilt into the w all,
thereby avoiding any protrusion, or it can be wall-mounted.

WARNINGS AND SAFETY DEVICES

The boilers made in our factories are all built with care being
taken over each individual component in order to protect both
the user and the installer from any accidents. We therefore
urge trained personnel to be particularly careful with the elec-
trical connections on completion of each job done on the
product, especially as far as the bare parts of the conductors
are concerned. These must not stic k out of the ter minal board
in any way, so as to a void any possibility of contact with liv e
parts of the conductor itself.
Both this instr uction manual and the user' s man ual are an
integral part of the product. Make sure that they always remain
with the machine, even if it is sold to another owner or user , or
if it is transferred to another plant. If it should get damaged or
lost, ask your local Technical Assistance Ser vice for another
copy.
Installing the boiler and any other assistance and maintenance
work must be carried out by qualified personnel in compliance
with the relevant laws and current standards.
We recommend that the installer instruct the user on how the equip-
ment works and on basic safety standards.
The boiler must only be used for the purposes for which it was
expressly made . The m anufacturer does not accept an y
contractual or extra-contractual responsibility for any damage
caused to people , animals , or proper ty, due to incorrect
15
installation, setting, or maintenance, or due to improper use.
15-40
On removing thùe packing, check the integrity and complete-
39 ness of the contents. Should any discrepancies be found,
contact the dealer that sold you the equipment.
39
The dr ain from the equipment' s saf ety v alve must be con-
41
nected to an adequate collection and remo val system. The
42
manufacturer of this equipment is not responsible for any
44
damage caused by the safety valve opening.
16
During installation the user must be informed that:
16
- Should any water flow out, they are to shut off the water
supply and contact the Technical Assistance Ser vice im-
16
mediately.
16
- The working pressure for the plumbing system must be
17
between 1 and 2 bar , and must not exceed 3 bar. Where
necessary, prof essionally qualified personnel from the
17
Technical Assistance Ser vice must be called in.
17
- If the boiler is not to be used for a lengthy period of time,
17
we recommend calling in the Technical Assistance Ser v-
ice to carry out the following operations:
18
· Switch the main switch for the equipment and the main
18
switch for the entire plant to "off".
· Close the taps on the water and the fuel supplies, for both
the heating and the hot water systems.
· Empty the heating and hot water systems if there is any
risk of freezing.
- Maintenance must be carried out on the boiler at least
once a y ear, and appointments m ust be made timeously
with the Technical Assistance Ser vice.
8