grow 'n up Climb N Slide Gym Manual De Instrucciones

Climb N Slide Gym
ASSEMBLY INSTRUCTIONS
DO NOT DISCARD: IMPORTANT LITERATURE. PLEASE READ AND FOLLOW
INSTRUCTIONS CAREFULLY AND IDENTIFY ALL PARTS BEFORE ASSEMBLY.
TO AVOID SERIOUS INJURY:
IMPORTANT:
!
DO NOT install this product on a hard surface. A fall onto hard surfaces could
result in head or other serious injuries. Never put on concrete, asphalt, wood, packed earth or other hard
surfaces. Carpet over hard floors may not prevent injury.
This product is designed for family indoor/outdoor DOMESTIC use only, and is not intended for use in schools,
parks, day care centers, nurseries, or other public places.
SAFETY INSTRUCTIONS
WARNING: CHOKING HAZARD - Small parts. This product contains small parts and sharp points which
!
are necessary for assembly. Prior to or during assembly of this product, keep all components out of children's
reach. Small parts pose a choke hazard to children under 3 years of age.
• Adult assembly required. Phillips / cross-headed screwdriver (not included) required during assembly.
• On-site adult supervision is required for children of all ages at all times when on or around this product.
NEVER leave children unattended.
• This product is intended for use by children ages 1-5 years.
• Maximum members of users are up to 2 children, and must not exceed a total maximum weight of 100 lbs
(45 kg) at any one time on the climber gym.
CAUTION :
!
• DO NOT allow children to play on this product until it is completely installed.
• DO NOT let children use this product in any manner other than intended.
• Slide feet first. One child at a time.
• Dress children appropriately while on and around this product. Use well-fitting shoes that do not have slippery soles.
• DO NOT allow children to wear ponchos, scarves, hoods, jewelry, loose shoes, loose-fitting clothing, neckties,
clothing with loose strings and /or clothing that might be potentially hazardous while using this product.
• Make sure all parts are securely snapped together before use.
A Frame A x 1 B Frame B x 1
F3 Metal screw x 2
G Platform x 2
F1 Slide x 1
Footer x 4
H
F2 Slide Extension x 1
P AR T S L IS T
DE S C R IP T ION
#
A Frame A
B Frame B
C Frame C
D Frame D
E Frame E
F1
F2 Slide Extension
F3 Metal Screw
G Platform
H
Fabric cloth A
I
Fabric cloth B
J Handle J
K Handle K
L
M Basketball Board
N
Ladder
O
Illustructions not in scale.
C Frame C x 1 D Frame D x 1 E
A B
M Basketball Board x 1
J Handle J x 1
I Fabric cloth A x 1
A B
N
K Handle K x 1
I Fabric cloth B x 2
L Pipe x 10
No. 2022 1.
Beware to follow the orientation. Assembled parts cannot be reversed.
!
Ages: 1 - 5y
Fail to do so will occur incorrect assembly.
GB
!
QT Y
1
1
1
1
1
Slide 1
1
2
2
Footer 4
1
2
1
1
Pipe 10
1
1
5
Ball
!
Expand the frame height: Unlock the screw caps, pull up the top parts of Frame A & B until the Safety Locks are snapped in place. Reverse the screw
caps in position to lock the top frames.
Place Frame A on a flat surface with the connector ends facing up.
Attach 6 pipes (L) at the same time to connect Frame A & B. DO NOT JOIN PIPE INDIVIDUALLY.
2.
!
Frame E x 1
L
Ladder x 1
O Ball x 5
Connect 4 pipes (L) to join Frame C to the frame assembled.
Frame B
L
Frame A
3.
i ) Turn up the frame assembly. Join
Frame D to Frame C. Hand thread
Frame C
the screw caps to lock the pipes in
position. Make sure the Safety Locks
are securely snapped in place.
Frame D
ii) Lift up the Cover and attach the
Footer (H). Do the same for other
3 footers.
Lock
Screw Cap
Unlock
Safety Lock
Close
Open
Safety Lock
Cover
Cover
H