Tabla de contenido
Publicidad
FUSE
E.M.C.
Battery Type:
Battery Life:
Altitude:
Pollution degree:
Operating Range:
Operating Humidity:
Storage Range:
Temperature Coefficient:
WEIGHT
DIMENSIONS
CLEANING
Supplied:
User Guide
Test lead set
Zip-up carrying case
Optional:
Fused lead set, FPK8
Test & carry case
Switch Probe SP1
Miniature Clip on A.C. Current Transformer MCC10
Test Record Card (pack of 20)
Publications
'A Stitch in Time'
Users of this equipment and or their employers are reminded that
Health and Safety Legislation require them to carry out valid risk
assessments of all electrical work so as to identify potential sources
of electrical danger and risk of electrical injury such as from
inadvertent short circuits. Where the assessments show that the risk
is significant then the use of fused test leads constructed in
accordance with the HSE guidance note GS38 'Electrical Test
Equipment for use by Electricians' should be used.
Use only a 500 mA (F) 440 V, 32 x 6 mm
ceramic fuse of high breaking capacity HBC
10 kA minimum. Glass fuses MUST NOT be
fitted.
In accordance with IEC61326 including
amendment No.1
POWER SUPPLY
6 x 1,5 V Alkaline cells IEC LR6 type only.
Typically 3000, 5 second operations, at 1 kV.
ENVIRONMENTAL CONDITIONS
625g
220 mm x 92 mm x 55 mm
Wipe with a clean cloth dampened with
soapy water or Isopropyl Alcohol (IPA).
ACCESSORIES
Up to 2000 m
2
-20 to +40 °C
90% R.H. at 40 °C max.
-25 to +65 °C
<0,1% per °C on all ranges
Note
Part Number
6172-189
6220-437
6420-132
6111-218
6420-112
6220-606
6111-290
6111-216
AVTM21-P8B
Publicidad
Tabla de contenido
