Descargar Imprimir esta página

Care And Maintenance - Celestron 44200 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Your Celestron microscope is a precis
ti
mes. Follow these care and maintenance suggestions and your microscope will need very little
m
aintenance throughout its lifetime.
• When you are done using your microscope, remove any specimens left on the stage.
• Turn off any electric illuminator knobs or switches.
• Unplug any power cords being used.
• Always place the dust cover over the microscope when not in use or when being store
• Store the microscope in a dry and clean place.
• Be very careful if using your microsco
microscope or your eyes.
• When moving your telescope, carry it by the ar
underneath the base and not by the focuser knobs, eyepiece housing, etc.
Clean the outside surfaces
• Always unplug any cords before cleaning.
Never clean optical surfaces with cloth or paper towels as they can scratch
easily.
• Blow off dust with a camel's hair brush or a
• To clean fingerprints off of optical surfaces, use a lens cleaning agent and lens tissue availab
at most
photo outlets and when cleaning do not rub in circles as this may cause sleeks or
scratches to occur.
• Never disassemble or clean internal optical surfaces. This should be done by qualified
technicians at the factory or other authorized repair facilities.
When handling glas

Care and Maintenance

ion optical instrument and sh
pe in direct sun light to prevent damage to the
(metal and plastics) with a moist cloth.
s specimen slides, be careful as the edges can be sharp.
ould be treated with care at all
m bracket with one hand and your other hand
n air blower from optical surfaces.
16
d.
optical surfaces
le

Publicidad

loading

Este manual también es adecuado para:

442044420244206