Picture - KENMORE ELITE 348.71395610 Manual De Uso Y Cuidado

CUSTOMIZING TV SETTINGS

Picture

Press buttons until Picture is highlighted. Press OK to enter the Picture options screen. Use the ▲/▼ to select the
options listed below and then use
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Blue Screen
Advanced Settings
MEMC
-
16
En
buttons to set the selected option.
Cycle among picture mode: Standard/Movie/Game Mode/User/
Dynamic.
Alternative: You may press the P.MODE on the remote to select
the picture mode directly.
Adjust the difference between light and dark levels in the picture.
Increase or decrease the amount of white in the picture.
Control the color intensity.
Adjust the balance between red and green levels.(For AV mode
and ATV mode)
Adjust the level of crispness in the edges between light and dark
areas of the picture.
Cycle among color temperatures: Cool/Normal/Warm.
Allow the blue background to turn On/Off during weak or no signal
conditions.
Noise Reduction: Reduce the noise level of the connected
device: Off/Weak/Middle/Strong.
White Balance: Adjusts the white balance.
Color Management System: To set Color Mode, Color, Hue,
Saturation, Brightness or reset the color space.
Color Space: Select between Wide or Standard .
Backlight: To adjust the backlight.
Gamma: To set the value of gamma: 2.0/2.2/2.4.
Factory-reset: Reset the TV to factory default settings.
Cycle among Motion Estimate and Motion Compensation modes:
Off/Low/Middle/High.