Important Safety Information; Intended Use; Safety Instructions - Flex MXE 1000 Instrucciones De Funcionamiento Originales

Important safety information

WARNING!
Read all safety instructions and general
instructions. Failure to comply with the
safety instructions and general instructions
may result in electric shock, fire and/or
serious injuries . Keep all safety instructions
and general instructions in a safe place for
future reference.
Before using the power tool, please read the
following and act accordingly:
these operating instructions,
–
the "General safety instructions" on the
–
handling of power tools in the enclosed
booklet ( leaflet no.: 315.915),
the currently valid site rules and the
–
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
for its intended use,
–
in perfect working order.
–
Faults which compromise safety must be
repaired immediately.

Intended use

The mixer is designed
– for commercial use in industry and trade,
– with mixer paddle of appropriate size and
shape,
– for mixing liquids of low viscosity such
as paint, varnish, adhesive, light plaster,
resin,
– for mixing material of high viscosity
such as plaster, mortar, lime, screed,
filler etc.,
– for mixing stiff and sticky material of
high viscosity such as adhesive, resin,
sealing and insulating compound etc.,
12
MXE 1000/MXE 1002/MXE 1200/MXE 1202
– for use with mixer paddles and
accessories which are indicated in these
instructions or recommended by the
manufacturer.
The mixer is not to be used for mixing
foodstuffs.

Safety instructions

WARNING!
Read all safety instructions and general
instructions. Failure to comply with the
safety instructions and general instructions
may result in electric shock, fire and/or
serious injuries . Keep all safety instructions
and general instructions in a safe place for
future reference.
 Do not process explosive materials
(e.g. highly inflammable solvents).
Power tools generate sparks that could
ignite the vapour given off.
 Pull out the plug immediately and have
the power tool checked by customer
service if it falls into the stirred product.
Should stirred product makes its way into
the electric appliance, damage could
ensue and cause an electric shock.
 When working, hold the power tool firmly
with both hands and ensure that you
have a secure footing. The power tool is
controlled more securely if held with both
hands.
 Do not process any material containing
asbestos. Asbestos is carcinogenic.
 Take protective measures if dust is likely
to be generated during work that is
hazardous to health, combustible or
explosive. For example: some dusts are
carcinogenic. Wear a protective mask
and use a dust/particle extraction system
if one can be fitted.
 Wait until the power tool has come to
a stop before putting it down. The cutting
accessory may snag, causing the
operator to lose control of the power tool.