PNI PTZ1200 Manual De Instrucciones página 16

UPNP
The UPNP protocol is used to make automatic forwarding to the router. To use this feature make
sure this option is also enabled on the router.
Enable select the option to enable UPNP settings
HTTP Port: Routing will automatically distribute the device's HTTP port, but monitoring via
Internet Explorer will also need to enter this port.
TCP Port:
The router will automatically distribute the device's TCP port, but monitoring CMS will
require this port.
Mobile Port: The router will automatically distribute the device's Mobile port
but when you monitor over the phone you will need this port.
1.3.5 Display
Local preview mode includes: time display, channel name, recording status, alarm status,
transparency and the region covered.
Channel title: assign a channel title. Up to 25 letters.
Time display: Displays the date and time of the system
Channel title: Displays the channel number
Record status: displays the status of the recording
Alarm status: Displays the status of the system alarm
Transparency: Choose the transparency of the on-screen menu: value between 128 and 255
16