Publicidad
Idiomas disponibles
Idiomas disponibles
To change the channel function mode be sure you are in DMX mode. Use the MENU button to select "CH" followed by two digits.
•
Then use the UP and DOWN arrow buttons to change the setting from 01, 02, or 04. Your dimmer pack is initially set as a four channel
DMX switcher.
The dimmer pack is initially set to be activated by DMX address one. To change this setting be sure you are in DMX mode. Use the
•
MENU button to select the address settings, this will be indicated by an "A" in the first character of the LCD followed by three
numbers. Use the UP and DOWN arrow buttons to select your desired DMX address. Remember the DMX address tells your DMX
controller what channel to activate the pack's functions.
•
Once you have set the pack's DMX address be sure your controller's address matches that of the pack's.
Your pack will now operate as DMX dimmer, you may control the light output intensity through your DMX controller. 0 will give no
•
output and 100 will give you full output.
Fuse
R eplacement
To replace the protective fuse, use a flat head screwdriver to unscrew the fuse holder. Pull out the old fuse and replace it with a new one.
Insert the fuse back into slot and tighten. Always replace with the exact same type fuse remove unless otherwise specified by an
authorized our company service technician.
CAUTION:
A lways
d isconnect
t he
u nits
m ain
p ower
b efore
p erforming
a ny
t ype
o f
s ervice
o r
f use
r eplacement.
Power
S upply
Before plugging your unit in be sure the source voltage in your area matches the required voltage for your TR-‐D4. The unit is available in a
220V version. Because line voltage may vary from venue to venue, you should be sure to plug your power supply into a matching wall
outlet before attempting to operate you controller.
Product
D escription
The TR-‐D4 is 1, 2, or 4 channel DMX Dimmer Pack. This pack can serve as a stand alone chaser or a DMX dimmer pack. This pack is designed
for zero-‐crossing circuitry which protects against inductive loads, so it is safe for use with all lighting effects that include transformers such
as pin spots. Each channel comes with two 3-‐prong Edison sockets inputs for a total of eight. This unit features XLR female and male
connection for DMX compatibility. Each channel is equipped with a fuse for each channel, and a maximum output load of 6 ,3A per channel
or 16A total. This revision of our popular TR-‐D4 has a great new case design that makes it great for permanent or mobile applications.
User manual – Manual Usuario Dimmer 4 canales TR-D4 | Triton Blue | Rev. Mayo 2017 | www.triton-blue.com
Publicidad
