Before Use; Radio Operation - Denver TCU-211 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Unpacking
- remove all packaging.
- Check for presence of all parts and for transport damage. In case of damage or incomplete
delivery, please contact your dealer (-> Guarantee).
- Please keep the packaging. The appliance can be stored in it if it is not used for a longer period
of time.
- Place the appliance on a level, stable, clean and dry surface.
- Ensure that there is sufficient ventilation. Keep a minimum distance of 5cm between the
product and other objects or walls.
Power supply
- The appliance can either be powered through an electrical outlet or with batteries.
- Insert the power cable into the AC~IN at the back of the appliance. Connect the power plug to
a suitable electrical outlet. Make sure that the power supply voltage is the same as needed for
the appliance.
Battery operation
- Open the battery compartment at the bottom of the appliance.
- Insert 6 "C" size (UM-2) batteries, according to the polarity markings inside the battery
compartment and on the batteries.
- Use batteries of high quality only. Batteries of low quality might leak and cause damage. Do not
use new and old batteries together. Close the battery compartment lid after insert the batteries.
- The appliance is ready for operation.
- IMPORTANT: Do not use the appliance with an electrical outlet and batteries at the same time.
Remove batteries before connecting the appliance to mains power and remove the power
cable if the appliance is to be powered by batteries
- NOTE: The appliance draws a small amount of power even if it is not turned on. If you do not
use the appliance for a longer period of time, disconnect the power plug or remove all batteries.
IMPORTANT NOTE
- Automatic switch-off: The appliance will switch off about 8 – 10 minutes after finishing last
playback or after pressing the PLAY/PAUSE button to pause playback. If you will not use the
appliance any longer, set the function switch to the OFF position and unplug the power cable
with plug.
Antenna
- The appliance is equipped with a telescopic antenna located at the back of the appliance. Pull
out the antenna completely. Rotate and reposition the appliance to achieve the best reception.
Selecting a station
- Set the function switch (14) to FM position.
- Rotate the Tuning control to seek the next strong and clear radio station.
ENG

BEFORE USE

RADIO OPERATION

4

Publicidad

Tabla de contenido
loading

Tabla de contenido