How To Operate The Unit - Briteq BT-W30FC Mk2 Manual De Instrucciones

ENGLISH
9 channel mode

HOW TO OPERATE THE UNIT

Every time you turn the unit on, it will show "bt30" on the display and move all the motors to their 'home'
position and you may hear some noises for about 20 seconds. After that the unit will be ready to receive
DMX signal or run the built-in programs.
YOU CAN OPERATE THE UNIT IN 3 WAYS:
o
By master/slave built-in preprogram function
o
By CA-8 easy controller
o
By universal DMX controller (9 & 16 channel DMX mode)
 BY MASTER/SLAVE BUILT-IN PREPROGRAM FUNCTION:
Select this function when you want an instant show. By linking the units in master/slave connection, the
first unit will control the other units to give an automatic, sound activated, synchronized light show. Its DMX
input will have nothing plugged into it, and its master-LED will be constantly on and sound-LED will flash to
the music.
Important! This function only works when the blackout mode in the menu of the master is set to
OFF, otherwise nothing will happen! Read more about this option in the "Main Menu" paragraph.
 MASTER has 4 built-in shows: You can select
(show 4) directly in the menu of the master.
 SLAVES have 2 working options: The other units are set to slave mode (slave-LED is constantly on).
In order to create a great light show you can introduce contrast movements (pan/tilt of slave is
inversed)  In the menu of the slave units you can go to option
select:
o
o
 BY EASY CONTROLLER
When used in Master/slave mode we strongly advise you to use the CA-8 "Easy
controller" Just connect this small controller to the 1/4" jack of the master unit, and
you will be able to control the following
BRITEQ
®
 Normal slave: slave works in sync with the master.
 2 light show: slave works in opposite with the master.
(show 1),
11/68
OPERATION MANUAL
(show 2), (show 3) or
and
BT-W30FC Mk2