Tabla de contenido
Publicidad
Wireless
Installing your dimmer
quick-start guide
1
Turn power off at circuit breaker!
Pico
remote control & in-wall dimmer
®
Welcome—and thank you for purchasing a CasétaT
Wireless dimming kit. In order to control your lights from
an app or remote, you'll need to replace an existing
switch with a
CasétaT Wireless in-wall dimmer.
Before you install the dimmer, please watch the
installation video at
WARNING: SHOCK HAZARD.
www.casetawireless.com/support
May result in serious injury or death. Turn off
power at circuit breaker or fuse before installing.
We hope you enjoy the convenience of CasétaT Wireless!
Double your warranty
Love CasétaT Wireless dimmers? Have ideas
for making them better? Tell us what you think
and we'll extend your warranty by 1 year.
www.casetawireless.com/register
Contents supplied
In-wall dimmer
ClaroR wallplate
(PD-6WCL)
(CW-1)
PicoR remote control
(PJ2-3BRL)
Important note:
Some lights have one wall switch, while others
have two or more wall switches (such as stair lights,
which have a switch at both the top and bottom
of the stairs). We've included instructions for lights
Wire connectors (3)
Screws (2)
with one wall switch (called a single-pole). If your
light has more than one switch (called a 3-way),
please visit
www.casetawireless.com/3way
for complete installation instructions and how-to
videos.
Tools you'll need
Flat-head screwdriver
Pliers
Phillips-head screwdriver
P/N 0301724 REV B
Using your Caséta T Wireless kit
Works with energy efficient
dimmable light bulbs:
With a smartphone or tablet (Bridge required, sold separately)
The CasétaT Wireless dimmer can be controlled from a smartphone when used
LED—up to 150 W
with the LutronR Smart BridgeT.
If you are using the dimmer and remote control with the LutronR Smart BridgeT
follow the instructions below.
CFL—up to 150 W
Note:
If you are using the dimmer and remote control with another
manufacturer's bridge, please refer to that manufacturer's instructions
Halogen—up to 600 W
for set-up.
1
Download the Lutron
Incandescent—up to 600 W
NOTE: You can mix and match dimmable LED and
CFLs, as well as halogen and incandescent light
bulbs, with
CasétaT
Wireless dimmers.
Dimmable LED and CFL light bulbs vary in their
dimming performance. If you're using these
bulbs and they flicker or turn off, please visit
www.casetawireless.com/lowend for information
www.casetawireless.com/LutronApp
on adjusting the dimmer for best bulb performance.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries. AppStore is a service mark of Apple Inc.
For a complete list of compatible dimmable LEDs
2
and CFLs, please visit
Launch the Lutron
www.casetawireless.com/bulblist
Compatible light bulbs include:
CreeR
BA19-08027OMF-12DE26-1U100
CR6-575L
EcosmartR
ECS BR30 W27 FL 120
Lutron
ECS 20 WW FL 50WE 120
FeitR
A19/OM/LED
PhilipsR
9290002295
SylvaniaR
3
LED12A19/DIM/O/827
Use the Lutron
LED21PAR38/DIM/P/930/FL30
Add devices
• PicoR remotes
• Dimmers
• Shades
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.
Installation for lights with one wall switch (single-pole)
2
Remove existing switch from wall
Remove the wallplate from switch.
1
2
2
2
Remove the switch and pull it away from the wall.
3
3
3
4
4
4
Disconnect all three wires* from the switch.
5
5
5
6
Ground
7
Ground
* If your switch has more than 3 wires attached, see
"Installing CasétaT Wireless in a 3-way switch application"
video at www.casetawireless.com/3way
Lutron
LutronR Smart
BridgeT
LutronR app
app
®
Search for "Lutron Caseta"
Lutron
app
®
The
LutronR
app will walk you through
setting up your devices.
ALL
app to complete
remaining steps
®
Control
Schedule
Connect
three ways
your lights
while away
3
4
Remove side sections (if necessary)
Connect the dimmer
3
2
1
Bend back
and forth.
Ground
1
Connect the bare copper (or green) "ground" wire
from the wallbox to the green wire on the dimmer
using a wire connector.
Do not
remove outside side sections
on dimmers at the end of gang.
2
Connect either of the remaining wires from the
wallbox to either of the remaining wires on the
dimmer using a second wire connector.
3
Connect the remaining wire from the wall to
the remaining wire on the dimmer using a third
wire connector.
Each dimmer
Dimmer at middle has all
has inside side
side sections removed.
sections removed.
Important note:
Removing side sections reduces the dimmer's
maximum wattage rating. See the chart below
for maximum wattage information.
5
Mount the dimmer
Maximum* wattage derating chart
(120 V~ 50/60 Hz)
Use the screws provided.
Side sections
None
1 side
2 sides
removed
LED & CFL
150 W
150 W
150 W
1
or*
Incandescent &
600 W
500 W
400 W
Halogen
* For maximum wattage information when
mixing light bulb types see
2
2 2
www.casetawireless.com/ganging
Without a smartphone or tablet (Bridge not required)
Changing the favorite light level
Pairing the dimmer and
on the PicoR remote control
PicoR remote control
(optional)
1
Press and hold "off" button on dimmer
You can use the round
"favorite" button on the PicoR
remote control to recall a
favorite light level. We've set
Hold for 6 seconds
it to 50%, but you can change
until LEDs start
it to any level you like.
blinking.
3
Set desired light level on dimmer
2
4
Press and hold "off" button on remote
Press and hold "favorite" button on remote
Hold for 6 seconds until LEDs
blink twice. New favorite
Hold for 6 seconds
level is now saved.
until lights flash 3 times.
x3
Repeat steps to pair other
PicoR remote controls.
For advanced features, tips on how to use CasétaT
Wireless dimmers with CFLs and LEDs, the complete
CasétaT Wireless product line, and more, please visit
www.casetawireless.com/features
6
Attach the wallplate
Attach the adapter to the dimmer using the
screws provided and snap on the wallplate.
1
2
2 2
3
'snap'
(If you installed the dimmer next to other dimmers
or switches, you'll need to install a wallplate with the
correct size/number of openings to accommodate all
the devices.)
7
Turn power on at circuit breaker
Using your controls
On
Brighter (with raised icon)
Darker
Favorite
Off
FASS
™
Front Accessible
Service Switch
Replacing light
bulbs using
FASST
Pull the FASST
switch out on the
in-wall dimmer to
remove power at
the light socket.
On
Brighter
Favorite
Darker
Off
Pico
remote control
®
Important notes:
x2
1. For indoor use only.
2. Operate between 32 ˚F (0 ˚C) and 104 ˚F (40 ˚C).
Device Ratings
In-wall dimmer
PicoR remote control
PD-6WCL
PJ2-3BRL
120 V~ 50/60 Hz
3 V- 10 mA
(1) CR2032 battery
(included)
CAUTION
Use only with permanently installed fixtures with
dimmable LED, dimmable CFL, halogen, or
incandescent lamps. To avoid overheating and
possible damage to other equipment, do not use
to control receptacles, motor-driven appliances,
or transformer-supplied appliances.
Codes
Install in accordance with all national and local
electrical codes.
Grounding
When no "grounding means" exist in wallbox, the
National Electrical Code (NEC
) allows a control to
®
be installed as a replacement if 1) a nonmetallic,
noncombustible faceplate is used with nonmetallic
attachment screws or 2) the circuit is protected by a
ground fault circuit interrupter (GFCI). When installing
a control according to these methods, cap or remove
green wire before screwing control into wallbox.
FCC/IC Information
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation. Modifications not expressly approved by Lutron Electronics Co.,
Inc. could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Warranty
For warranty information, please visit
www.casetawireless.com/warranty
Troubleshooting
Symptoms
Probable cause and action
Light does
• Light bulb(s) burned out.
not turn on or
• Breaker is OFF or tripped.
in-wall dimmer
• Light not properly installed.
LEDs do not
light up.
• Wiring error.
• FASST switch on the dimmer
is in the Off position.
Light does
• The dimmer failed to pair
not respond
with PicoR remote control;
to PicoR remote
see Pairing the dimmer and
control.
PicoR remote control.
• The dimmer is already at the
light level the PicoR remote
control is sending.
• The PicoR remote control
is outside the 30 ft (9 m)
operating range.
• The PicoR remote control
battery is low.
• The PicoR remote control
battery is installed incorrectly.
• Bulbs turn off
Verify bulbs are marked
while being
dimmable and visit
dimmed.
www.casetawireless.com/
lowend
• Bulbs turn on at
for information on adjusting
high light level
the dimmer for best
but do not turn
bulb performance.
on at a low
light level.
• Bulbs flicker
or flash when
dimmed to a low
light level.
Go to
www.casetawireless.com/support
for
additional troubleshooting suggestions.
Lutron,
, Claro, and Pico are registered trademarks and FASS, Caséta,
and Smart Bridge are trademarks of Lutron Electronics Co., Inc. NEC is a
registered trademark of the National Fire Protection Association,
Quincy, Massachusetts. Google and the Google logo are registered
trademarks of Google Inc., used with permission.
© 2014 Lutron Electronics Co., Inc.
P/N 0301724 REV B
Publicidad
Tabla de contenido
