1
list of parts
Your changer is supplied in one carton and contains:
1. Left panel
2. Right panel
3. Side frames
4. Padded top
5. Base shelf
6. Bath tub
7. Pan trays
2
assembling the changing station
2A
Unpack the changer carefully and unwrap each part taking care not to lose the plastic bag
of small items. Check the contents against the list of parts.
Attach the two side frames (3) to the left side panel (1) by inserting bolts (10) through the
holes in the side panel and tightening into the threaded ends of the side frames using the
supplied tool (13).
Attach the right hand side panel (2) in the same fashion.
2B
Turn the changer on its side as shown above and attach the padded top (4), insert two bolts
into the tubing of the frame of the padded top, before fully tightening the bolts slip the
elastic loops of the mesh bag (14) over the bolt heads then tighten.
Carefully turn the changing unit over and secure the opposite side with two more bolts.
2C
Attach the wheels (9) to all four corners of the changer, pushing the wheels firmly into place
along the slots provided.
NOTE: Ensure the wheels are locked when using the changer.
2D
Attach the base shelf (5) by placing the shelf in position then securing with flaps (A)
wrapped around the uprights of the two side frames (3) and with flaps (B) wrapped around
and under the bottom of the frames.
2E
Attach the utility holders (8) by hooking them over the front of the support frame for the
padded top (4).
Attach the pan trays (7) by hooking each tray over the tops of the two side frames (3) as
shown above.
Finally the bath (6) can be placed in the top of the changer.
3
using the bath
The changer's bath tub comes complete with a handy drainage hose (11) which can be
attached to the outlet on the underside of the bath.
Before placing water in the bath ensure the plug (12) is firmly located in the plug hole on
the inside of the bath.
NOTE: when using the bath, care should be taken that the water is
of a suitably safe temperature before placing the child in. Do not
use the bath without the frame.
4
The changer is now complete, please read the user guide notes to maintain the unit to its
highest standard.
8. Utility holders
9. Wheels
10. Bolts
11. Drainage pipe
12. Plug
13. Tool
14. Mesh bag