CAPITAL SPORTS CROSS PRO Manual Del Usuario página 25

Step 9
Fit the console mast cover (59L/R) to the mast (2) as shown, and then secured with the Phillips tapping screws (57).
NOTE: make sure the covers fitting properly.
Press repeatedly to select the display area you want to edit. The selected area will be high-
MODE
lighted by a flashing „SET".
SET Press repeatedly to change the value in the selected area (TIME, DISTANCE or CALORIES).
RESET Press to delete the current value.
Press any key to start the pulse test. Your heart rate will be displayed after a short latency of about 3 - 4 seconds.
Make sure all joints and screws fit tightly and are properly fastened.
Then the CROSS-PRO is ready-to-use.
Using the Training Console
Buttons
25