Freezing The Current Picture - Samsung FP-T5084 Instrucciones Del Propietario

Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button.
Press the ▲ or ▼ button to select the desired PIP window position, then press
the ENTER button.
In Double Window (
➢
be selected.
➢ If the PIP window is set to Double Window (
mode, the screen size or alignment may slightly differ depending on the
signal type.
Changing the PIP Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button at the bottom of the remote to select the desired
channel in the PIP window, then press the ENTER button.
➢ MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
Press the EXIT button to exit.
and
Press the PIP CH
channel.

Freezing the Current Picture

1 Press the STILL button to freeze a moving picture.
➢ Normal sound will still be heard. Press again to cancel.
➢ To prevent screen burn-in, this function will automatically cancel after 5
minutes.
While V-Chip is in operation, the Still function cannot be used.
➢
) and Double Wide (
CH buttons on the remote control to change the PIP
) modes, Position cannot
) or Double Wide (
English - 33
)