Using Your Appliance - Telefunken HCCV11 Manual Del Usuario

Press one time on the ON/OFF button, the light indicator will illuminate. Turn the
thermostat button to the MAX position, the heating light indicator will illuminate to inform
you the iron is on the preheating phase. As soon as the heating light indicator switch off,
press continuously for 1 minute the steam joytstick to start the steam function and start
ironing for 10 minutes on a clean clothes in order to take out all the residue present on or
under the soleplate.
Note: Your steam station has been designed to function using tap water. If your tap water is
very hard water type, we advise you to mix 50% tap water with 50% of distilled water
available in most shops. Always check that the water tank is properly secured in the device
after the refill and before putting it back to its location.

Using your appliance

1. Filling the water tank
light indicator of low water level is on. Retrieve the water tank from its location, open the
water tank filler. Fill in the water tank with a jug without exceeding the "MAX" level of
water indicator then close the water tank filler filler before putting the water tank back
into its location. Press one time on the ON/OFF button to restart the steam station.
Step 5
a. Retrieve the water tank from its location, open the
water tank filler.
b. Fill in the water tank with a jug without exceeding the
"MAX" (1.2L) level of water indicator then close the water
tank filler before putting the water tank back into its
location. Always check that you have well put back the
water tank into its location before starting to use your
steam generator.
c. Always fill in the water tank before using the steam
generator.
d. You can always refill your water tank when in use. Just
follow the above step of water filling when the warning
4
ENGLISH