Klarstein 10021651 Manual Del Usario página 14

HUMIDITY button
Pressing the activates automatic mode (when the LED dis-
play starts to blink the word ‚Auto'). You can select the desired humidity lev-
el by pressing HUMIDITY button repeatedly until the required humidity level is dis-
played (from 45% to 90% in increments of 5%). Once you select your desired humidity
level, simply stop pressing the button and you humidity level will be set. Wait another 5 seconds and
the numeric value on the LED display will switch to the current humidity level as measured by the
built-in Hygrostat. When the humidity level in the room reaches the set humidity level, the machine
will go into automatic sleep state and stop producing mist. When the rooms actual humidity level
drops below your set humidity level, then the machine will start producing mist again.
You can deactivate automatic mode very easily by pressing the setup button until you reach 90% RH.
Press the button one more time and you will now be in the manual mode. You will know that you are in the
manual mode because the blinking 'Auto' Icon disappears.
Pressing ANION button will activate the anion generator and start sending healthy ions into the air,
it will be represented by the tree icon (#19) displayed on the LED screen. Long press to switch on/off
night-light and power light.
Pressing the TIMER button to set the timer (when the LED display starts to blink the word
„Timer")The timer function determines how many hours the humidifi er will operate. You can set the
timer simply by pressing +I- once for each hour that you would like to run the unit. Many people
set the timer for 8-9 hours (during their sleep) but it can be set from 1 hour to 12 hours. When the
timer is set, the length of time is displayed in the middle of the LED display (#17). As time passes,
the time value decreases until it goes to 00:00 and the machine shuts off .
Once you have set the automatic humidity and the timer, the value of time remaining in timer. the
desired relative humidity and the actual relative humidity will displayed 40 seconds alternating in the
middle of LED display(#18)
If the humidifier should run out of water, you will hear a beeping sound before the machine will au-
tomatically shut off . The LED screen will display the Empty Water Tank icon (#16).
The bright LED display is designed to automatically dim alter 30 seconds of pressing any of the
LED panel buttons. The power light is also dimmed because the water tank is tinted. The result is a
soft blue glow. The light levels are bright enough to indicate that the machine is operating. yet low
enough to ensure a restful sleep in near darkness.
The SP8-807 is equipped with a Permanent Reusable White Dust & Anti-Microbial Filter. It
consists of an inner cylinder. an outer cover and a number of small plastic and ceramic balls. The
plastic balls are embedded with nano-silver, an anti-microbial agent designed to purify the water and
destroy microbes such as bacteria and mould. The ceramic balls function to soften the water by ad-
hering to minerals that cause white dust. They also serve to remove any unpleasant odour from the
water. The fi lter requires cleaning about once a month or 1.000 hours of use. See the maintenance
section of more information.
14