Faber FCH SLIM 94 BK KL Manual De Uso página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56
Boost function
Cooking area timer
Timer (generic)
Defrost function
Pause function
Recall function
Heating function
10
Every cooking area can be set to an additional power level for a maximum of 5 minutes.
To enable: select one of the 4 cooking areas and select "Boost" on the swipe keyboard. The corres-
ponding digit indicates
To disable: select one of the other possible values on the swipe keyboard.
The timer allows a specific cooking area to be switched off when the set time expires.
The cooking areas can be programmed individually because each one has its own timer.
To enable: turn on the hob and select one of the 4 cooking areas, then press "+" and "-" to set the
timer. The symbol
of the cooking area lights up. Press "+" and "-" separately to set the count-
down. The increase and decrease of the value during the setting varies according to the time to be
set. The display in the time management controls area shows the countdown.
To confirm the set time, do not touch anything for 5 seconds.
To disable: wait until the end of the countdown or reset the time values (press "+" and "-" and reset
with "-").
Timer with alarm for generic use.
To enable: turn on the hob, then press "+" and "-" to set the timer. Press "+" and "-" separately to
set the countdown. The increase and decrease of the value during the setting varies according to
the time to be set. The display in the time management controls area shows the countdown.
To confirm the set time, do not touch anything for 5 seconds.
To disable: wait until the end of the countdown or reset the time values (press "+" and "-" and reset
with "-").
To enable: select one of the 4 cooking areas and press
The digit of the selected area shows
To disable: press
or press
This function allows you to pause/restart any active function on the hob, by reducing the power
available in the cooking area and resetting all the functions.
During the pause, all the digits indicate
- No energy is produced in any of the cooking areas
- All functions and the timer are disabled.
To enable: with the hob on, press and hold
To disable: press and hold
imum along the swipe keyboard which shows an animation.
This function is used to recall the function settings of the hob if it is switched off by mistake using
.
With the hob off, to recover the settings press
seconds. A beep is emitted to confirm the operation.
When the hob is off, if it is not turned back on within 6 seconds, the settings of the previous func-
tions are lost.
This function is used to heat a pan to the maximum power before continuing to cook at a selected
level. The time interval for which the cooking area is held at maximum power depends on the final
cooking level that has been set. See the table:
Power level
1
2
3
4
5
6
7
8
9
Boost
Select one of the 4 cooking areas and press and hold the selected value (from 1 to 8) on the swipe
keyboard for 3 seconds. The hob will have a maximum power peak for a period of time that varies
according to the previously set cooking power, then it will go back to the value set at the beginning.
.
.
.
to inform the user that:
for at least 1 second.
for at least 1 second and slide your finger from minimum to max-
Timer (seconds)
40
72
120
176
256
432
120
192
Not available
Not available
.
within 6 seconds, then press
within 6

Publicidad

Tabla de contenido
loading

Tabla de contenido