Important Safeguards; Parts Description - Alpina SF-7641 Instrucciones De Utilizacion

ENGLISH

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance for other than intended household use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have been given supervision or instruction by a person who is
responsible for their safety concerning the use of the appliance. Children should be supervised to ensure that they do not
play with the appliance.

PARTS DESCRIPTION

1. Lid Cover
2. Water supply inlet
3. Drain hose
4. Wash Timer
5. Overflow filter port
6. Pulsator
7. Polymer cabinet
8. Polymer base
READ THESE INSTRUCTIONS
1. The appliance should stand on a firm, smooth and level place with the 5cm distance between the washing machine
and the surrounding.
2. Do not install on weak or rough flooring.
3. Do not put heavy objects on the washing machine.
4. Use the water inlet hose provided to connect to faucet/tap (water supply) into washtub water supply inlet.
5. Do not connect to the hot water supply.
6. Water should not exceed in the required water level, if water spills, turn off the hydrant immediately.
7. Adjust the level of the water according to the clothes type and quantity.
INSTRUCTION FOR USE
1. Set the wash selector to "Gentle" or "Normal". Please refer on Table 1. For wash mode.
2. Insert water hose to inlet or prepare a pail of water (if no water is available from the faucet) to fill the wash tub.
3. Put detergent depending on the water volume and detergent package indication.
4. Set the wash timer knob to 1 minute to dissolve the detergent.
5. Put clothes one by one in the washtub and push it towards the bottom.
6. Continue adding water up to desired level
7. Set wash timer to appropriate settings. Refer on table 1
TABLE 1: WASH MODE AND WASH (RINSE) TIME
2