How To Use - Steren HER-205 Manual De Instrucciones

HOW TO USE

TURN ON / TURN OFF THE DEVICE
The device has a speed stabilization system. When you turn it on, it will start at the
highest speed and then it adjust to the selected speed.
Press the switch to turn on, change the speed or turn off the device:
High speed
Medium speed
Low speed
The LED will indicate the speed in which that the device is located.
PLACE / REPLACE THE PIECES
Keep turn off the device while you place the pieces.
1
Turn the lock to
the right and
remove it.
To turn off the device, press the
switch as many times as necessary,
or press and hold the switch for a few
seconds until it switches off.
2
Insert the
3, 2 mm
adapter.
3
Place the the lock again by
turning to the left and
without reaching at the
bottom.
4