Safety Information - Lance Lab AEROSOL 3 Manual De Funcionamiento

Safety Information: AerosoL 3
Telescopic Lance
Safety Regulations:
1.1. Please read the instruction manual carefully before operating this equipment for the first time.
1.2. Please observe the safety and warning regulations!
1.3. Failure to observe these regulations will exempt the manufacturer of all liability.
1.4. Keep the operating instructions in a safe place.
1.5. Failure to comply with the safety instructions and warnings can lead to serious injury or death
of persons.
Application:
2.1. Please see compatibility details located at the back of this instruction manual.
Warning:
3.1. During transport ensure equipment is stored in protective carry tube.
3.2. Do not operate the appliance when other people are in the workspace.
3.3. Store equipment and chemicals in a safe place, with end-caps and plugs in place, away from
children and animals.
3.4. When the lance is passed onto third parties, it must be accompanied by the operating
instructions.
3.5. Please observe during operation, that the application of aerosol sprays is in accordance
with the manufactures instructions and any statutory protection acts.
3.6. Please be aware that spray will continue to exit the flexible tip of the lance for 3 - 4
seconds after pressure has been released from the aerosol cap.
Safety Guidelines:
4.1. Make sure that the product you wish to apply is suitable for this equipment. The data safety
and handling instructions provided by the chemical manufacturer must be noted and
observed. The use of chemicals is entirely at the user's own risk. Should you have any doubts
in this respect please contact the distributor where you purchased your aerosol.
4.2. The lance is not suitable for use with caustic substances, corrosive substances (acids) or
highly flammable or combustible substances.
4.3. Before each use, check to ensure that the lance has been correctly assembled, and that it is
in a functional and undamaged condition. Damaged parts must never be used.
EN
-5-