Memory Function; Maintenance - Levoit LV-PUR131 Manual De Instrucciones

Ocultar thumbs Ver también para LV-PUR131:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
NOTE: Press the Auto button, Sleep button, or Speed button to exit out of
Auto Mode.
Press the Speed button to cycle through the unit's
fan speeds: Low, Normal and High.
NOTE: Fan speed cannot be adjusted while on Auto or
Sleep Mode.
The Timer button allows you to set the air purifier
to run from 1-12 hours. To set the timer, press the
Timer button to cycle through the different time
settings. When you reach your desired time,
the display will flash 3 times before setting. The
unit will automatically power off once the timer
is finished. To cancel the timer, press the Timer
button until the display reads "-:--," and wait until
"-:--" flashes 3 times.

Memory Function

The air purifier will remember its programmed settings when
turned off, and will resume the settings when it is turned back on.
Please note that the air purifier must remained plugged in for this
memory function to work.
C L E A N I N G &
M A I N T E N A N C E
The Change Filter Icon
It is recommended to change the air filters about every 6
months—this is based on the average daily use as well as the
average air quality. The "Change Filter" icon will turn on to remind
you to check the air filters; this icon will turn on sooner or later
based on how often you use your air purifier.
If the "Change Filter" icon has turned on, please remember to
reset the air purifier after checking the filters by pressing the black
reset button inside the vent on the side of the air purifier (See
Resetting the Air Filter Lifetime).
8
NOTE:
When the "Change Filter" icon turns on, it does not necessarily mean
that you must change your filters. However, it is important to watch out
for the following signs of expired filters:
Increased operating noise
Decreased airflow
Clogged filters
Increased presence of odors
The environment in which the air purifier is being used may also
extend or shorten the lifetime of the air filters. Using your air purifier in
an environment of relatively high pollution may mean you will need to
change the air filters more often.
If the air pollution in your environment is very high, there is a possibility
that the filters may not be completely effective and may need to be
replaced before the "Change Filter" icon lights up.
Please remember to reset the air purifier after changing the air filters.
Replacing Air Filters
If your air filters can no longer filter fresh air, they must be
changed to ensure the lifetime of your air purifier. Follow the steps
below to properly install new air filters in your unit. You can also
scan the QR code to purchase new air filters.
1
1.
Unplug the air purifier and
remove the back cover.
2
2. Remove the old air filters
and properly dispose of
them.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido