General Settings - Olympia CC 201 Manual De Instrucciones

1.4. Start-up Procedure
1. Connect the mains cable to a wall outlet and turn the unit on.
2. The unit goes into auto test mode.
3. Please do not push any buttons during auto test mode and wait until the unit reports ready-to-operate.
2. Settings and Functions

2.1 General Settings

The Olympia CC 201 comes with two different counting options for coins:
Counting coins in Free Count Mode (without count stop)
In this count mode all coins in the hopper are counted and the unit only stops if one of the coin boxes is filled
to maximum capacity. This count mode is the default setting after turning the unit on.
Counting coins in Batch Count Mode (with count stop)In this count mode the coins are counted according to a
freely adjustable count stop and the unit stops as soon as one of the count stops is reached. The corresponding
denomination is shown on the display. Press the START / STOP button to continue counting. This count mode
is particularly suitable for coins for rolling or counting the target cash in hand at the start of the shift.
Please ensure not to overfill the hopper higher than the coin pin. The coin counter automatically stops 20
seconds after registering the last coin.
Olympia CC 201
- 11 -