Chauvet DJ CUBIX 2.0 Guia De Inicio Rapido página 3

Cubix™ 2.0 QRG
To Begin
Product
Description
Product Overview
AC Power
Power Linking
Fuse
Replacement
Control Panel
Description
Unpack your Cubix™ 2.0 and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier
immediately, not Chauvet.
The Cubix™ 2.0 is a multicolor centerpiece that combines two different
effects. With centrally mounted LEDs and a surrounding quad-sided derby
effect, the Cubix™ 2.0 allows for various effects, all independently
controllable.
LED Display
Control
Buttons
Safety Loop
DMX In/Out
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
For the maximum number of Cubix™ 2.0 products that you can power link at
each voltage, see the User Manual or the sticker on the product.
To replace the fuse in the Cubix™ 2.0:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value
3
EN
Microphone
Sound Sensitivity
Knob
Fuse Holder
Power In/Out