Graham Field John Bunn DigiO2 Manual De Operación página 4

wARNINGS continued
Inspect the device before use to ensure that there is no visible damage that may affect
patient or user's safety or measurement performance. thereafter, inspect the device at
least once a week.
GF health Products, Inc. assumes no responsibility for any damage or injury caused by
improper installation or use of this product.
DO NOt open the oximeter housing. It contains no serviceable parts. Service must be
performed by trained, authorized personnel only. Otherwise, device failure and health
hazard may occur.
EXPLOSION HAZARD: Do not use the oximeter in the presence of flammable anesthet-
ics, explosive substances, vapors or liquids.
the oximeter is designed for real-time and rapid measurement. It is not suitable for
long-time continuous patient monitoring. DO NOT apply the sensor to the same finger
for more than two hours. If any readings are found to be abnormal, please change the
position of the sensor.
the oximeter is intended only as an adjunct in patient assessment. It must be used in
conjunction with clinical signs and symptoms. It is intended as a measuring, not a treat-
ment, device.
4 John Bunn DigiO Finger Pulse Oximeter
2