Impecca KBB600CW-2 Manual Del Usuario página 9

Connecting the wireless mouse
After inserting the batteri
one of two methods below
to reinsert the nano receiver.
Method one:
Step 1: Locate the Code reset button on the underside of the mouse.
Step 2:
Method two:
Step 1: Press the three mouse buttons (left click, middle scroll, and right click buttons)
Step 2: Release all three mouse buttons and then insert the nano receiver into
Notes:
The receiver does not consume energy while it is plugged in. When not in use, you can store
the nano receiver in the battery compartment of the mouse or the keyboard. It is strongly
reco mmended that you leave your nano receiver connected at all times, or that you place it in
the battery compartment when not in use, as it is a small component and may easily be lost.
If your monitor is equipped with USB ports, it is strongly recommended that you use a USB
port on your PC or laptop instead for best results.
es in the wireless mouse, you can connect to the nano transceiver by using
. If you have already connected the wireless keyboard, you do not need
Code reset button
Press and then release the Code reset button. Insert the nano transceiver
into a USB port on your computer, if the nano device is not already
inserted.
simultaneously for 3 seconds.
a USB port o n your computer, if the nano device is not already inserted.
3 Buttons
8‐
-