Specifications; Accessory - Toa WT-4810 Instrucciones De Operación

9. SPECIFICATIONS

Power Source
Power Consumption
Receiving Frequency
Selectable Channel
Receiving System
Diversity System
Mixing Output
Mixing Input
Antenna
Receiving Sensitivity
Squelch Sensitivity
Squelch System
S/N Ratio
Harmonic Distortion
Frequency Response
Operating Temperature
Finish
Dimensions
Weight
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.

• Accessory

AC – DC adapter ........................................ 1
8
AC mains (Supplied AC – DC adapter must be used.)
130 mA (12 V DC)
690 – 865 MHz, UHF
16 channels
Double superheterodyne
Space diversity
MIC: –60 dB*/LINE: –20 dB*, 600 Ω
Phone jack (unbalanced), XLR-3-31 type connector (balanced)
–20 dB*, 10 kΩ
Phone jack (unbalanced)
Rod antenna
Better than 80 dB, S/N ratio (20 dBµV input, 40 kHz deviation)
18 – 40 dBµV variable
Using together of noise SQ and carrier SQ
Better than 104 dB (A-weight, balanced output)
Less than 1%
100 – 12,000 Hz, ±3 dB
–10 to +50°C
Resin, dark gray
240 (w) x 35 (h) x 110 (d) mm
1.05 kg