Driving With The Electric Scooter; Multi-Control System - Micro SPARROW XL Manual De Usuario

Driving with the electric scooter

WARNING

Multi-control system

This electric scooter is operated by either thumb throttle or motion control.
The default setting is using by thumb throttle to start when the rider is kicking from
approx. 5km/h. There is an alternative to use kick control function. In order to change
the riding modes or select other features, please see the Micro APP instruction manual.
Sensors detect the kicking movement (= push-off from the ground) the driver makes,
and the scooter subsequently provides support with energy similar to that of an electric
bicycle with a support motor.
Important information
● Motion control only becomes active from approx. 5 km/h. This means the rider must
use body power alone to accelerate to 5 km/h (1-2 kicks) before the initial support is
noticeable.
● The scooter keeps the speed which the rider accelerates to by kicking off the ground.
● Pressing the brake triggers a sensor which stops the motor.
WARNING
20
Ride slowly to become accustomed to the
novel riding sensation, especially when
riding for the first time. Always be aware that
travelling at higher speeds on the electric
scooter will also result in a longer braking
distance.
Please note that riding with electrical support
takes getting used to.
The acceleration is much greater than with
a normal kicking movement. This type of
acceleration is initially unusual and can be
abrupt. When riding for the first time, please
be extremely cautious.
EN