First Time Setup - Spypoint LINK-MICRO-S-LTE Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 86
STARTING YOUR CAMERA

FIRST TIME SETUP

1.
Turn on the camera.
-
2.
The green "STATUS" light will flash while searching for a signal (can
-
take a few minutes).
-
3.
The "STATUS" light will light up in one of the following 3 colors:
Red:
Orange:
Green:
4.
When the top right light flashes red, 30 seconds remain before
the photo mode is turned on. This allows you to leave the area
without being photographed.
5.
The camera is ready for use when all the lights turn off.
6.
If the light is red during step 3, you should:
Turn your camera off and then back on.
Retry while pointing the antenna at different angles.
Try moving it to a spot with better signal.
Try our #CA-01 long-range cellular antenna (sold separately),
which could help improve signal strength.
INSTALLING YOUR CAMERA
1.
Mount the camera using the installation strap.
2.
The camera should be at the same height as the animal's mid-body.
3.
The targeted animal should be at 25 feet/7.5 meters away from the camera.
4.
For brighter pictures at night, ensure you have elements in the
background to reflect the IR flash.
Insufficient signal.
Acceptable signal.
Optimal signal.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido