Troubleshooting - Listo 24HD-CAC842 Instrucciones De Uso

This Listo product is compatible with the brands mentioned*
(* brands belonging to third parties unrelated to Sourcing & Creation)
Before contacting your after-sales service, carry out the following basic checks. If you cannot
solve the problem by following the instructions below, contact your store's service centre.
Symptoms
No power.
No picture or sound.
There are no HD
DTT channels or the
image is distorted.
Unclear image or
with static.
The remote control
is not working.

TROUBLESHOOTING

Possible causes
The mains adapter is not
connected.
The power point
disconnected from the power
supply.
The picture settings are poorly
adjusted.
Sound is off.
The TV is not turned on.
The reception of
terrestrial television
channels is only possible in
the areas with coverage. Check
the proximity of a transmitter.
Check the quality and strength
of the receiving signal.
The antenna's orientation is
not good.
There is interference.
There are no batteries in
the remote control, or the
batteries are dead.
111
Solutions
Make sure the mains adapter is
plugged into a wall outlet.
is Try plugging the TV into different
power outlets to cross-check
them.
Check the image brightness and
contrast settings.
Make sure that the Mute mode is
not activated
Turn on the TV.
digital
(DTT)
Have your installation checked
by a professional.
Check the direction, positioning
and connection of your antenna.
Try to find the source of
interference and move it away
from the TV.
Check that the batteries are
correctly inserted in the remote
control.
Check the batteries. If they are
dead, replace them.
V.1.0